MERIDA SCULTURA 905 with SRAM S60

MERIDA SCULTURA 905
在下的第二台公路車，也是二手車，基本上在下很少買新車，主要原因是因為，不知道自己的能力能不能發揮這台車的性能，如果沒辦法，那如何脫手便成了一個大問題。
SCULTRUA系列評價都很好，實際上台灣能見度很低，誠以為～主要還是因為外觀塗裝不夠討喜，個人是比較喜歡簡單的塗裝，當年含之前年度的SCULTURA系列的外觀，說實在不會很有令人印象深刻的高級感，雖然也知道「MERIDA綠」有他的特色，但是畢竟綠色不是單車市場的主流色彩（Bianchi綠有品牌認知，就不討論了）。
雖然本車是接管的，但是在強度以及過彎穩定性都是十分可靠，抱歉說句超過的話，雖然在下不是很強力的騎士，但是這台車架的好，可以讓你更換胎皮、輪組或是鏈條時，明顯感受到力量傳遞的差異和過彎或抽車的穩定性差異，至少這代表，這是一款夠水準的車架與前叉。
在下最喜歡這台車的地方有兩點，一是在於他是接管的，又很低調，在我更換輪組前，對外我都宣稱這是一台碳纖貼紙的入門鋁合金公路車，就因為他是接管的，而且塗裝沒有氣勢 XD，重點是有人信！
另一就是Flexstay的後上下叉提供了優異的吸收震動能力，能夠穩住車身震動又不覺得軟腳的車架，真是舒服！
SRAM S60是最近購買的二手品，暫時取代的之前的MAVIC KSYRIUM ELITE登山輪組，使用一百公里後的基本感想就是，平路感覺輕一個擋位，爬陡坡重兩個擋位，但是抽車動作變得靈敏而直接，過彎和下坡車身也變得更加穩定，性能上算是互有勝負，有好有壞；購買前有考慮過外觀配色，加上不喜歡使用主流產品ex: Racing、Shamall系列，所以選擇了S60三色版作為板輪初體驗，以在下的車身配色，選S60真的是不會後悔的選擇，至少還能當個視覺系騎士 XD
單車還是要有人騎，那是騎士的自我磨練，論車論零件不是很有意思，出門走走～就先寫到這了～
​ ​ ​ ​ ​ ​ ​ ​ ​ ​ ​

20120329_OLFA BUY BUY BUY

Ya, I brought a lot OLFA products recently. OLFA often has well-shape knife and special designs in their newly products.
This time, I think I got some wrong decisions to buy them. But why? I would tell you gradually.

---

OLFA CK-1 (the consumable is CKB-1) Craft knife
Extruded metal body with matting black spray, its high productive quality make attractions. And it's slim but I could say it's easier to control than its looks.
The most important is it's cheap~
簡單用中文寫些感想好了，壓鑄的金屬本體和消光黑噴漆，由於製作工藝品質極好，所以還挺迷人的，雖然薄，但是還算好控制，重點是便宜（以OLFA的產品來說）
​ ​ ​ ​

OLFA Ltd-06 Stainless Steel Blade Craft Knife (Limit CK)

Similar to CK-1, this model have thick plastic body. Ya, it's not the metal body, but the plastic body is firm. So, although I would prefer the wood  or metal body's temperature and weight, this still provide satisfying touch and handle.

Its blade is made with stainless steel, have 30 degree angle. Shape and Expansive.
類似 CK-1，只是刀片是不鏽鋼，角度變成30度，雖然質感和握感俱佳，可惜是塑膠本體，有些缺憾也有些貴。
​ ​ ​
OLFA Ltd-07L Limited NL
This is a SHIT! Designed as a seamless length control make this unsafe and dangerous to use, you would never know when the lock screw would be loosen and the blade will cut anyone. The shiny plastic body and grip could not compensate the defective and faulty safety design. Do not buy this, you would regret.
爛設計，不值得買！
​ ​ ​ ​
BTW, this is my NT CUTTER-LG, made in Osaka, Japan. With firm aluminum body and anti-slide stopper on the front end. And the red blade picker is made as the warning. For safety reason, this is better.
反而這隻NT cutter-LG 安全穩定多了
​ ​
OLFA Top Sheet Cutter 一枚切
An interesting and expensive product, it has the return pressure control and special cutting angle w/o the shape directly pressed on the paper, seems that could make you only cut the top sheet. HAHAHA, it's a wrong and cheat. You would never know how many force you could press. So its only advantage exists at when you are not a professional-tool user and you do not have suitable cutting pad under the sheet, you could pick other thicker paper such as A4 copy paper to instead of the cutting pad. OK, I regret again.
昂貴的唬人產品，如果已經有適當切割工具的話，可以不用看這隻，這只適合沒事會隨手整理折價券的日本人。
​ ​ ​ ​

OLFA PRC-2 18mm Perforation Cutter (the consumables is PRB18)

Good! What can I say! When I need to cut a dot line, I have no choice to use it.
好用的東西，事實上根本沒得選擇。
​ ​

OLFA PRC-3 28mm Perforation Cutter (the consumables is PRB28)

OK~if the PRC-2 could not satisfy the need, I have the bigger one.
大一點的也是有
​ ​

OLFA CS-3(125B) (the consumables is SWB-3(XB-125))

An easy handled plastic and wood/bamboo saw. Still do not have chance to use this.
​ ​

OLFA CMP-2 Snap-Off Blades Circle Cutter

I do not have this knife using experience before. but I know when I need to cut a circle up to 7~30cm diameters, it would be useful.
​ ​ ​ ​