Why? Because of Feeling, Love or Memory?
Yes, it's LOVE.
Most similiar products are going to slim, tiny and thin today. They think slim is a well design.
But this knife is even more twice thick than others,with the well-balanced weight and the suitable anti-slip grip. Easy to handle and control is the best specificaition. And has a good look. Really well designed!
這是一把台灣品牌、台灣設計、台灣生產的SDI美工刀，型號0414，不是OLFA、NT Cutter這些有名的國際大廠，但是他很便宜又非常好用，自從1994年買了一支用到現在以來，已經過了十多年，有天我在書局看到他還在販賣，而且價格、外型皆與當年如出一轍，一時大喜，陸續買了十把，三把放在家裡，其他七把是推薦同事購買。
我沒事幹嘛買這麼多？是愛阿！
大多數類似尺寸的美工刀，光顧著設計的越薄越迷你越好，但是這把美工刀至少有其他知名品牌的兩倍以上厚度，而且有著好控制的平衡感，加上合襯的防滑橡膠，外型也很耐看，設計的非常好。
anti-slip grip with the pellets make this knife get more points
防滑橡膠設計小顆粒便於抓握，有加分效果。
High quality and made in TAIWAN
品質好，而且是台灣生產（1994當時）
with a razor caution at the front end
seems having a cover in the original design
前端有刀片方向警示，而且似乎原始有設計外蓋？
the blade guider indicates why it's so cheap, because 2/3 blade are unstable and would be bended when you need to cut a arc.
the simplest solution is to push out the blade, then use a needle pliers to minimize the gap between the guider and the blade.
這把美工刀之所以便宜的原因是因為，大約2/3的機會，前端的刀片引導結構公差比較大，刀片比較容易晃動，最簡單的解決方式就是把刀片稍微推出，然後用尖嘴鉗壓緊引導結構，這樣刀片就很穩定了。
used-blade picker, thin and stable
and having two side pits make it easy to pull out from the tail
用過刀片的夾持器縫隙尺寸適中，刀片不容易脫落，而且有凹槽方便用力拉出尾端
look!
smart clamps hold the rear stablely
微微的凸點和T型結構把尾端穩定的固定住
And I still keep the original factory blades*2 hided in my knife without the rust, amazing~
令人驚訝的是，當年原廠附贈的兩片刀片至今未使用，而且還是閃亮亮的
the safty slide mechanism is durable, and use an additional spring to avoid the unexpected pulled in/out of blade. The special mechanism works very well.
安全裝置耐用且順暢，而且有多一條彈簧增加力量，必免刀片突然滑出傷人
And when you use the knife, it looks like this photo, and easy to hold and control, indeed.
當你拿著這把美工刀時，看起來就像這樣，確實是好握好控制
PS
In early years, it's made in Taiwan, but now the place of production has been moved to China.
附註：早期是台灣製，現在是大陸製
沒有留言:
張貼留言