Briefly hit the point
1. 軌跡球與羅技Logitech m570交換, 滑鼠游標會變的順暢，比較不容易寸動， 而且對m570 影響不大。
Exchange the ball with Logitech m570 would improve the smooth of curser display, and wouldn't affect m570.
2. 滑鼠左鍵 改成cherry DG2 T85 1.47N， 因為大拇指很有力，這樣做雖然比較重手，但是比較不會誤觸左鍵, 同時能夠提升抓著DEFT時的舒適度。
Weld cherry DG2 T85 1.47N micro switch on left key would improve the hit error and relax your wrist when holding DEFT.
3. 滑鼠右鍵 改成 OMRON D2F-3-7 0.7N 小紅點 微動開關， 可以改善 原本的開關手感不明確 的問題。
Weld OMRON D2F-3-7 0.7N micro switch on right key would improve the fuzzy feel compared with the original MIC OMRON switch.
4. 滑鼠右鍵的塑膠按鈕 ，可以拆下 後把圖片上 末端的 塑膠研磨過 ，可以改善 按鍵下壓回彈容易摩擦 造成不順暢的問題。
Remove then Grind the right key parts would avoid the rub between body and right key.
第一次拆，搞不清楚螺絲的位置，弄得亂七八糟 ，需要拆的人，看了這張照片，就懂得怎樣拆會比較好看。
It's my 1st time to remove this screw, make a mass. If you are the 1st, refer this would help.
回裝時注意要從左鍵下方的導引柱先開始插入安裝
Returning to normal, 1st you have to insert the guiding stem below the left key.
滑鼠右鍵的零件要拆下來研磨末端
Grind the end side of right key part
與羅技m570交換軌跡球 會改善很多 滑順度 ，雖然游標速度會慢一點，但是幫助比較多。
exchange the ball with Logitec M570 would be more smoothy, although slightly reduce the cursor speed, but more benefit.
沒有留言:
張貼留言